What we supply
Our pool pump range covers the circulation duty on most residential pools and light commercial installations. The pumps are self-priming with an integrated strainer basket, so they can be mounted above water level and serviced without breaking into the suction line.
Housings are corrosion-resistant thermoplastic, which matters in chlorinated and salt chlorinated water. Motors are supplied in the voltage and frequency combination of your destination market rather than a single global part number.
Where you are also buying filters from us, we size the pump against the filter area and the pipework so the system sits at a sensible flow rate instead of over-driving the filter bed.
Key features
- Self-priming design with integrated strainer basket
- Corrosion-resistant thermoplastic pump housing
- Single-speed and variable-speed options
- Suitable for chlorinated and salt-chlorinated water
- Mechanical shaft seal, field replaceable
- 50 Hz and 60 Hz motor builds
- Single-phase and three-phase options for commercial duty
Typical specification range
The figures below describe the range we normally supply in this category. Model-by-model data sheets, curves and drawings are sent with every quotation.
| Parameter | Typical range |
|---|---|
| Rated power | 0.35 – 3.0 kW (approx. 0.5 – 4 HP) |
| Voltage | 220–240 V / 1-ph, 110–120 V / 1-ph, 380–415 V / 3-ph |
| Frequency | 50 Hz or 60 Hz, specified per order |
| Flow rate | approx. 5 – 35 m³/h depending on model and head |
| Maximum head | approx. 8 – 20 m |
| Connections | 50 mm / 63 mm, or 1.5″ / 2″ threaded |
| Motor protection | IP55 class, thermal overload protection |
| Speed control | Fixed speed, or variable speed with on-board controller |
Ranges are indicative of the category we supply and are not a specification for any single model. Confirmed performance curves, dimensions and nameplate data are issued with each quotation.
Where these are used
Residential pools
In-ground and above-ground domestic pools running a single circulation loop.
Commercial installations
Hotel, apartment and community pools where duty hours are long and serviceability matters.
Retrofit and replacement
Drop-in replacement for an existing pump where connection size and duty point are known.
Tell us what you need
Send us your model requirements, target market and volumes. We reply to every technical and commercial enquiry within one business day.